Spring Steel Strip and Plate

price:
Contact customer service
Heat Treatment
Cold Processing
Hot Working

Spring Steel Strip and Plate

Spring Steel Strip and Plate

Spring Steel Strip and Plate

1.Description

Spring Steel is typically used because of its’ high yield strengths, resistance to deformation and its ability to return to its original shape.

Back to Top

2.All Grades Comparison

GB ASTM JIS EN DIN
55 1055 / CK55 1.1204
60 1060 / CK60 1.1211
70 1070 / CK67 1.1231
75 1075 / CK75 1.1248
85 1086 SUP3 CK85 1.1269
T10A 1095 SK4 CK101 1.1274
65Mn 1066 / / /
60Si2Mn 9260 SUP6,SUP7 61SiCr7 60SiCr7
50CrVA 6150 SUP10A 51CrV4 1.8159
Back to Top

3.Quality Standard

DIN 17222 Cold Rolled Steel Strips for Springs Technical Conditions of Delivery
BS EN 10132 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions

Back to Top

4.Chemical Composition(%)

Steel Grade C Mn Si P S Cr Ni B Cu Mo V
55 0.52-0.60 0.50-0.80 0.17-0.37 0.035 max 0.035 max 0.25 max 0.30 max / 0.25 max / /
65 0.62-0.70 0.50-0.80 0.17-0.37 0.035 max 0.035 max 0.25 max 0.25 max / 0.25 max / /
70 0.62-0.75 0.50-0.80 0.17-0.37 0.035 max 0.035 max 0.25 max 0.25 max / 0.25 max / /
75 0.72-0.80 0.50-0.80 0.17-0.37 0.035 max 0.035 max 0.25 max 0.30 max / 0.25 max / /
85 0.95-1.04 0.40 max 0.35 max 0.025 max 0.025 max / / / / / /
65Mn 0.62-0.70 0.90-1.20 0.17-0.37 0.035 max 0.035 max 0.25 max 0.25 max / 0.25 max / /
60Si2Mn 0.56-0.64 0.70-1.00 1.50-2.00 0.035 max 0.035 max 0.35 max 0.25 max / 0.25 max / /
50CrVA 0.46-0.54 0.50-0.80 0.17-0.37 0.025 max 0.025 max 0.80-1.10 0.35 max / 0.25 max / 0.10-0.20
Back to Top

5.Mechanical Properties(Quenched and Tempered Condition)(T=20°C if not differently stated)

Steel Grade Tensile Strength Rm (Mpa) Yield Strength Rp0.2 (Mpa) Elongation A5 (%) Area Reduction Ratio C (%)
65 980 min 785 min 9 min 35 min
70 1030 min 835 min 8 min 30 min
85 1130 min 980 min 6 min 30 min
65Mn 980 min 785 min 8 min 30 min
60Si2Mn 1275 min 1180 min 5 min 25 min
50CrVA 1275 min 1130 min 10 min 40 min
Back to Top

6.Delivery Conditions

Cold Rolled only
Cold Rolled+Soft Annealed (G)
Cold Rolled+Soft Annealed+Cold Rolled (G+K)
Cold Rolled+Hardened+Tempered (H+A)

Back to Top

7.Surface Conditions

Grey Blue (GR)
Bright (BK)
Polished (P)
Polished and Colour Tempered (P+AF)

Back to Top

8.Heat Treatment

Steel Grade Quenching Temperature (°C) ( Media Tempering Temperature (°C)
65 840 oil 500
70 830 oil 480
85 820 oil 480
65Mn 830 oil 540
60Si2Mn 870 oil 480
50CrVA 850 oil 500
Back to Top

9.Mill′s test certificate:

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.

Back to Top