Inconel 600 UNS N06600 2.4816 Nickel-based Alloy

price:
Contact customer service
Heat Treatment
Cold Processing
Hot Working

Inconel 600 UNS N06600 2.4816 Nickel-based Alloy

Inconel 600 UNS N06600 2.4816

With over 35 years of industry expertise, Fushun has the industry knowledge and resources to find you the metal products that you need for your specific industry applications. We are in stock and ready to quickly deliver hard-to-find metals. Our ISO 9001-certified metal supply is one of the most comprehensive selections on the market. We provide timely customer support and quick delivery on all quantities of our in stock products.

 

Contact us for more information regarding our nickel alloy manufacturing and distribution options.  Fushun is your trusted nickel alloy supplier for all types of Nickel alloy material.

1 Description

Alloy 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.

This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.

Back to Top

2 Applications

Some typical applications are: Barge and tank truck liners; Carburizing atmospheres; Ethylene dichloride crackers; Furnace trays, mufflers, hangers; Gasoline stabilizer production; MgCl2 evaporates; Phenol condensers; Soap manufacture; Titanium dioxide; Vegetable and fatty acid vessels

Back to Top

3 Standard

Rod, Bar, Wire and Forging Stock: ASTM B 166; ASME SB 166; ASTM B 564; ASME SB 564; AMS 5665; AMS 5687; BS 3075NA14; and 3076NA14; DIN 17752; DIN 17753; and DIN 17754; ISO 9723, 9724, and 9725, MIL-DTL-23229, QQ-W-390.

Plate, Sheet and Strip: ASTM B 168; ASME SB 168; ASTM B 906; ASME SB 906, ASME Code Cases 1827 and N-253, AMS 5540, BS 3072NA14 and 3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.

Pipe and Tube:  ASTM B 167; ASME SB 167, ASTM B 163; ASME SB 163, ASTM B 516; ASME SB 516, ASTM B 517; ASME SB 517, ASTM B 751; ASME SB 751, ASTM B 775; ASME SB 775, ASTM B 829; ASME SB 829, ASME Code Cases 1827, N-20, N-253, and N-576, SAE/AMS 5580, DIN 17751, ISO 6207, MIL-DTL-23227

Other:  ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR NC15Fe

Back to Top

4 Chemical Component

Grade Ni Cr Fe Co Mn Cu Si C S
600 ≥72.0[a] 14.0–17.0 6.0–10.0 N/A ≤1.0 ≤0.5 ≤0.5 ≤0.15 ≤0.015
Back to Top

5 Mechanical Properties

Form and Condition Tensile Strength 0.2% Yield Strength % Elongation in 2″ % Reduction of Area Rockwell Hardness
Rod and Bar

Cold-drawn

Annealed

As-drawn

Hot rolled

Annealed

As-rolled

Hot-finished

Strip

Annealed

 

 

80-100

105-150

 

80-100

85-120

80-120

 

80-100

 

 

552-689

724-1034

 

552-689

586-827

586-827

 

552-689

 

 

25-50

80-125

 

30-50

35-90

35-90

 

30-45

 

 

172-345

552-862

 

207-345

241-621

241-621

 

207-310

 

 

55-35

30-10

 

55-35

50-30

50-30

 

55-35

 

 

70-60

60-30

 

70-60

65-50

65-50

 

—-

 

 

65-85B

90B-30C

 

65-85B

75-95B

75-95B

 

84B max.

Back to Top

6 Corrosion Resistance

The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions. This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds

Back to Top

7 Heat Treatment

Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.

Back to Top

8 Workability

Hot Working/Forging

Low sulfur reducing furnace atmospheres should be used in forging. Major hot working should be done between 2300/1850°F, while light working may be continued as low as 1600°F. No hot working should be attempted between 1600/1200°F due to lower ductility in that range.

Back to Top

9 Machinability

Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp. Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.) Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.

Back to Top

10 Cold Working

For higher properties, alloy 600 can be cold worked below 1200°F (649°C).

Back to Top

11 Welding

Alloy 600 can be joined by the usual welding , brazing, and soldering process.

Quality & Testing

Fushun supply Certification with all shipments, containing full chemical analysis and also mechanical test results if requested.

 

All incoming material is visually inspected and PMI (Positive Material Identification) tested before processing begins and all our production material is checked during each stage of processing.

 

All incoming orders are produced to the individual customer specification, some of which may involve processing sample batches for testing prior to full production.

 

Final Inspection carried out on all finished material to include:

Visual inspection

Dimensional checks

PMI (Positive Material Identification)

Mechanical tests

 

Nickel Alloy Material Available Formats

Fushun offers pure Nickel alloy materials in a variety of forms, including:

Seamless & welded pipe

Seamless & welded tube

Bar

Wire

Sheet

Plate

Forgings

Pipe fittings

Flanges

Weld Rod

 

Nickel Alloy Supply Quantities for Single Items or Full Bills

At Fushun, we can supply single items or full bills of nickel alloy materials for most any project. No inquiry is too small. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of nickel alloy products.

 

Contact Fushun for Nickel Alloy Materials Today

Contact us for more information regarding our nickel alloy material options, or request a quote for further pricing details today. Fushun is your trusted nickel alloy supplier and manufacturer of premium nickel alloy materials.