X46Cr13 1.4034 Stainless Steel

price:
Contact customer service
Heat Treatment
Cold Processing
Hot Working

X46Cr13 1.4034 Stainless Steel

X46Cr13 1.4034 Stainless Steel

Grade :X46Cr13

Number:1.4034

Classification:Martensitic stainless steel

Density:7.7 g/cm ³

 

Our supply size :

Diameter : 80 to 600 mm ;

Length : 1000 to 9000 mm ;

 

Our advantage :

  1. High Quality, Reasonable Price
  2. Over 40 Years Experience
  3. ISO NQA Certificated Factory
  4. Worldwide shipping
  5. Emergency Orders and Fast Delivery

 

Chemical composition % of steel X46Cr13 (1.4034): EN 10088-2-2005

C Si Mn P S Cr
0.43 – 0.5 max   1 max   1 max   0.04 max   0.015 12.5 – 14.5

 

Equivalent grades of steel X46Cr13 (1.4034)

EU Poland Russia
EN PN GOST
X46Cr13 4H13 40KH13

 

Standard:

EN 10088-2: 2005 Stainless steels. sheet/plate and strip of corrosion resisting steels for general purposes

EN 10088-3: 2005 Stainless steels. semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels

EN 10088-1: 2005 Stainless steels. List of stainless steels

 

Heat Treatment

The following is material 1.4034 stainless steel heat treatment, such as hot forming, annealing, quenching, tempering.

Standard Designation (Steel number) Hot forming Heat treatment Annealing Quenching Tempering Temperature, °C
Temperature, °C Type of cooling Temperature, °C Type of cooling Temperature, °C Type of cooling
DIN EN 10088-2 X46Cr13 (1.4034) 1100 to 800 slow cooling Annealed 730 to 790  
+QT850 1000 to 1100 oil, air 200 to 350
DIN EN 10088-3 Annealed 750 to 850 furnace, air
+QT850 950 to 1050 oil, air 650 to 700

 

1.4034 is characterised by its high hardenability in conjunction with good corrosion resistance in moderately corrosive environments. Due to its higher carbon content, it is more hardenable than 1.4031. It is used in the quenched and tempered condition and due to its high hardness, is ideally suited for the production of cutting tools and the production of roller bearings.

 

X46Cr13 is a basic steel without molybdenum, nitrogen or vanadium. It can be outperformed (typically at a higher cost) by more advanced steels like N680 with similar carbon content.

 

Welding

Due to the high carbon content, 1.4034 is not suitable for welding. If welding cannot be avoided, preheat to 350 °C-400 °C and post heat treatment temperature is about 650 °C.

 

X46Cr13 has good workability when hot, and potential to reach high hardness of up to 56 HRC. It contains a moderately high carbon ratio of approximately 0.46% which gives it a good compromise between high hardness and corrosion resistance for many applications. It is also relatively inexpensive to produce.

 

Corrosion Resistance

(PREN = 12,5-14,5)

DIN EN 1.4034 is not resistant to intergranular corrosion upon delivery. It has good corrosion resistance in non-chloride and acid-base environments; polished surface under tempered condition have good corrosion resistance; in order to maintain good corrosion resistance, it is not recommended to be used in annealed or high temperature conditions.

 

Use & Application

Hardened steel for cutting tools, table knives, machine knives, razors, scissors and measuring tools, ball bearings, skates, etc.

 

Surface Option

1 Black Surface

2 Grounded: Bright but rough ; Not precision

3 Machining for plate: Bright and precision; Little turning scar

4 Peeled/Turned: Bright and precision; Little turning scar

5 Polished: Very Bright and precision size; Not turning scar

 

Other Services

1 Cutting: Small pieces

2 CNC Machine: Produce as your drawing

3 Package: Bare/Nylon/Canvas/Wooden

4 Payment:T/T, L/C, O/A(request credit)

5 Transport:FOB/CFR/CIF/DDU/DDP (train/ship/Air)

 

Mill test certificate

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.

 

We also supply :

1.2510/H10, 1.2842, 1.2379/D2, 1.2080/X210Cr12/D3, 1.2436, 1.2365, 1.2885, 1.2343, 1.2344/H13/SKD61, 1.2581/H21, 1.2709, 1.2345, 1.2738/P20NI, 1.2083/420J2, 1.2316, 1.2312/P20S, 1.23111.2764

For all products, please check here: Fushun products